Ghost Box Hacks: Ghost Box Hacks: How to hack the Grey and White Radio Shack 12-469

Saturday, January 10, 2015

How to hack the Grey & White Radio Shack 12-469

Take out case screws, there will be one in the battery compartment.
Gently pry the case apart.
With the back off, you will looking at a circuit board. That board needs to lift, swinging left. Grab it from the right side and swing it left. If it is screwed down, take those screws out to free the board.
With that board swung up to the left side, pay attn to the wires on the left hand side that connects the board in your hand and the board in the radio. They will all be different colors.
Look on the board in the radio at the spot where that series of multicolored wires connects to that board, and it will be labeled. It will be labeled mute (3rd from the top) - should be connected to a red wire. That's the mute wire. Severe that w a razor blade or an exacto knife, finger nail clippers will even do the trick.
Put everything back how you found it and screw the case back down.
Enjoy