How to hack the Radio Shack 12-588
- Take out all case screws, there's one in the battery compartment.
- Gently pry the radio apart, be careful to not break the solder joints at the battery terminal on the inside of the radio.
- Looking at the inside, the top board needs to lift up. Lift that up to see the board underneath it. In the far back, on the side of the radio where the battery terminal is. There will be a set of multicolored wires connecting the top board to the board in your hand. On the bottom board, MUTE will be labeled.
- Whichever wire is connected to where it says mute, cut that wire.
- Place the board you are lifting up back in place and screw the case back down.
- Enjoy.
-Wes King
No comments:
Post a Comment